USA
United Kingdom
Australia
Canada
France
Germany
Hungary
Israel
Italy
Spain
Mexico
Singapore
United Arab Emirates
Smart Clear Primer 6m²
€32.00 ex.VAT
Smart Clear Primer is specially formulated, fast drying transparent primer
Ideal for sealing porous and new surfaces in preparation for our transparent whiteboard paint. Smart Clear Primer, a transparent coating, seals the surface before application.
It is water based, low odour and suitable for plaster, drywall, wood, wallpaper and other dry or absorbent surfaces.
Measure your surface area. Choose the total product quantity to cover this area.
- 10 year product guarantee
- Commercial grade performance
- Fast Drying
- Environmental (exceeds all standards): Isocyanates free, Low VOC, Solvent Free
- Coverage / Volume / Weight: 6m² / 750ml / 1.07kg
- Product Colour: Clear
- Product Finish: Low sheen
- Odour: Very low
- VOC: Less than 28g/l
- Suitable Surfaces: plaster, wood, metal glass, plastic, composites, tiles and ceramics.
Application: Apply to absorbent surfaces before Smart Whiteboard Paint Clear, ensuring the surface is prepared and free from defects. Apply the first coat and sand smooth; apply the second coat and sand smooth, and repeat if necessary. For example, new wood or plaster may require more coats and sanding to ensure it is smooth enough for the whiteboard paint.
Unsure about the application process, send us a photo of your material or get in touch and we can offer advice and recommendations . We are here to help and advise you through the steps.
FAQ's
Start by ensuring the wall is clean, smooth, and free from dust, grease, or defects. Now use a high-quality foam, mohair roller for even application it can also be sprayed. Apply the first coat of clear primer in thin, even strokes and allow it to dry completely, for about 2 to 4 hours depending on the conditions. Once dry, sand the surface to achieve smoothness. Repeat the process for additional coats if the surface is highly porous or uneven. Sand after each coat to ensure a flawless base for your final paint or coating.
Clear primer seals porous surfaces, enhances topcoat performance, and ensures smooth, even application for coatings like whiteboard paint.
Typically, two coats are sufficient, but highly absorbent surfaces like plaster or wood may require additional coats for achieving optimal results.
You must allow the primer to dry for at least 2–4 hours before applying the next coat or the final paint.
Yes, sanding after each coat ensures a smooth, flawless surface for better adhesion and finish.
Smart Clear Primer is suitable for plaster, drywall, wood, wallpaper and other dry, absorbent surfaces.
Use a high-quality foam or mohair roller. However, if you are using a mohair roller, then make sure to remove all loose fibers before application.
Clear primer is used to seal porous surfaces, enhance paint adhesion and improve the overall performance of specialty coatings.
Yes, clear primers are specifically formulated to create a transparent, sealed base that preserves the natural look of the surface while preparing it for the topcoat application.
